Page 1 of 1
Spin on oil filter size
Posted: Mon Jan 27, 2014 10:45 pm
by southerly95
I have a spare spin on oil filter housing which has a 3/4" threaded spigot (approx size). Which filter should I order, suppliers don't say which is which other than fits 1300 or their own spin on kits. Thanks, John
Re: Spin on oil filter size
Posted: Tue Jan 28, 2014 7:17 am
by Trickydicky
For my spin on oil filter I use halfords part no HOF203. Take the housing into halfords to check the fit
from memory it costs around £3.
Re: Spin on oil filter size
Posted: Tue Jan 28, 2014 12:46 pm
by Matt
The spin on filter that fits just about everything (except the marina A+ blocks) is the same as a mini.
The coopers part number for said oil filter is Z25. I don't know the thread size off hand
Re: Spin on oil filter size
Posted: Tue Jan 28, 2014 3:15 pm
by katy
On this side of the pond, Fram PH3614 fits. As TrickyDicky suggested take the housing w/you for a trial fit when you go looking. Besides the thread make sure the gasket on the filter lines up w/the machined surface on the housing.
Re: Spin on oil filter size
Posted: Thu Jan 30, 2014 7:05 am
by dalgrae
I think the thread size is 3/4 by 16TPI UNF form if that helps
Re: Spin on oil filter size
Posted: Sun Feb 02, 2014 5:22 pm
by dalebrignall
ph966b
Re: Spin on oil filter size
Posted: Mon Feb 03, 2014 10:04 pm
by TFM150K
And keep the box so you know the number for next time (if your memory is anything like mine)!
