Page 1 of 1
early series 2wipers
Posted: Fri Nov 05, 2004 7:56 pm
by phil63
I am having some trouble with the clap hands type wipers on my split screen , The one on the passenger side has not got full travel and the whole motor is loose , but I cannot see how it should be fixed down . can anyone help?
Phil
Posted: Fri Nov 05, 2004 11:20 pm
by Cam
There are 4 nuts and screws holding the motor mounting bracket to the bottom of the dash. Under the windscreen seal there are mounting screws for each wiper wheelbox.
Which part is loose? the wiper motor or the wiper pivot to body mount?
series2 wipers
Posted: Wed Nov 10, 2004 12:58 pm
by phil63
Hello , it seems that the wiper motor is loose in the metal "box" that is bolted under the dash . How is it secured to the "box"?
Phil
Posted: Wed Nov 10, 2004 1:19 pm
by Cam
With bolts from the motor through the box. If you feel up under the dash, you should be able to feel them. It might be easier to remove the glovebox/dash section adjacent to the motor to get at it.