Page 1 of 1

Rusted seat holding down clamps?

Posted: Wed Jan 15, 2014 4:07 pm
by zagatoman
Just been out in the morris and my seat started to rock around while driving and eventually came loose altogether. On inspection I found the clamps that hold the seat down had rusted and cracked and eventually broken. I have never seen this happen before on all the minors I have had before, is this something that happens?

Looking to replace all four seat holding down clamps so if anyone has a few kicking around can you drop me a line.

pwood13660@blueyonder.co.uk

Thanks, Paul

Re: Rusted seat holding down clamps?

Posted: Wed Jan 15, 2014 4:15 pm
by ASL642
I would advise you to check the area of floor that these clamps bolt to as well by lifting the carpet.

Re: Rusted seat holding down clamps?

Posted: Wed Jan 15, 2014 5:26 pm
by katy
I made my own replacements out of 1/8" X 1" stainless[frame]Image[/frame]

Re: Rusted seat holding down clamps?

Posted: Thu Jan 16, 2014 4:37 pm
by drivewasher
Here's a link to what I thought were new ones. Turns out they are reconditioned IE second hand & painted!
http://morrisminorspares.co.uk/shop/pro ... 0b576b2240