Morris Minor Owners Club

Does anyone please have the part number for these(front wheel)?Also brake linings if possible.
Thankyou

Soory should have said shoes not linings.

You may find it easier to fit 1098 cylinders, requiring slight modification to the back plates but more readily available

Thanks for that Mike.This looks like the best route then.So maybe all I now need are the shoes?

If you have the shoes you may be able to get them re lined

No I only have the drums and backplates.I found an old thread on here that said TR7 rear shoes fit with slight modification?

Indeed the late TR7 9" shoes are almost identical - really only lacking the 'groove' in the end where the adjuster will sit on a Minor. You 'may' need to shave off any overhanging lining material at the sides.....one set I have as spares (for my TR7) are slightly wider than the other set where the lining material is exactly the width of the steel shoe. And not at all expensive from a TR7 supplier. Shop around though and check ebay !! Wolseley cylinders are available - (used on a number of other cars too...) but not inexpensive. The Minor cylinders are not difficult to fit and further spare are then assured!

Cheers Roy.Was starting to get withdrawal symptoms!

SWMBO assures me there is NO internet in Tenerife......strange really, because I see Wi-fI signs all over the place......