Hi
I've bought two new original style draught excluders for my 2 door saloon. Please is anyone able to confirm whether or not the seal should also fit along the bottom edge of the door aperture, ie under the sill kick plate? I'm assuming not?
Any advice or photo would be very much appreciated of exactly how the seal fits at the bottom of the a and b posts.
Many thanks
Door draught excluder
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
PaulTubby
- Minor Fan
- Posts: 457
- Joined: Mon Jun 15, 2009 1:45 am
- Location: Manchester
- MMOC Member: Yes
Re: Door draught excluder
Hi, no the seal only fits up the a post, across the roof lip and down to the bottom of the b post. Nothing along the kick plate sill edge...
-
DAVIDMCCULLOUGH
- Minor Legend
- Posts: 3010
- Joined: Sun Sep 09, 2007 10:42 pm
- Location: Whiteabbey, Co Antrim
- MMOC Member: Yes
Re: Door draught excluder
I found this on google images
http://www.morris-minor.co.uk/p575.htm
Leave a couple of inches at the kick plate ends, you cut the metal part off and tuck the rubber down in behind the kick plate, it has a small raised area at each end for this.
http://www.morris-minor.co.uk/p575.htm
Leave a couple of inches at the kick plate ends, you cut the metal part off and tuck the rubber down in behind the kick plate, it has a small raised area at each end for this.
Too many Minors so little time.....