Morris Minor Owners Club

Dear sir, there is someone that have one or more pictures of rear exhaust fitting. Infact, during restoration we closed the hole in the area of rear chassis rail and know we don't know how to make the hole for the bracket exhaust support.

Thanks, Max

Inside the boot floor there is a double strength section beside the end off the chassis leg were the bumper mounting part bolts on, the exhaust is also attached at this point. If you look at the 3rd page of this restoration were the boot floor is painted in red primer you can pick out the exhaust hole on the left side.

http://www.mmoc.org.uk/viewtopic.php?f= ... ir#p489925

It's not exactly critical - just pop a hole through where it fits the mounting the have !