Hi
Can anyone help me with the different torque settings for a 948 engine? I am in the process of assembling the engine as soon as I have all the parts back from machining.
Thanks
Rob
Torque settings for engine
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
Bit of Both
- Minor Friendly
- Posts: 57
- Joined: Mon Feb 13, 2012 8:16 am
- Location: South Africa
- MMOC Member: No
Re: Torque settings for engine
Big ends 35 ft lbf, mains 60 ft lbf and head nuts 44 ft lbf. All the rest just use common sense.
-
Bit of Both
- Minor Friendly
- Posts: 57
- Joined: Mon Feb 13, 2012 8:16 am
- Location: South Africa
- MMOC Member: No
Re: Torque settings for engine
Hi
Thank you for the information. Those were the ones I thought had to be right.
Regards
Rob
Thank you for the information. Those were the ones I thought had to be right.
Regards
Rob
-
IslipMinor
- Minor Legend
- Posts: 2147
- Joined: Mon May 10, 2004 9:10 pm
- Location: Oxford, UK
- MMOC Member: Yes
Re: Torque settings for engine
Rob,
The torque settings for most of the fixings for the Minor are listed in the first thread named 'Thread Sizes' at the beginning of the 'Mechanical' section.
The torque settings for most of the fixings for the Minor are listed in the first thread named 'Thread Sizes' at the beginning of the 'Mechanical' section.
Richard
