Page 1 of 1
su h2 carb seals
Posted: Fri Sep 13, 2013 3:08 pm
by boydogs
I have just bought a battery and tried to start the engine for the first time in 15 years, I noticed petrol coming from under needle jet nuts, i took the jet assembly apart and found the 2 rubber glands and the sealing washers need renewing, could i buy these items seperately or do i have to buy full carb kit . SU H2 11/4" throttle off a 1958 950 saloon. Most important is where to aquire them, Doe`s the club have these ? i havn`t bought any spares from the club jet. Boydogs
Re: su h2 carb seals
Posted: Fri Sep 13, 2013 5:30 pm
by mike.perry
Available as a kit from Club Spares or Burlen Fuels 01722 412500
Re: su h2 carb seals
Posted: Fri Sep 13, 2013 7:46 pm
by boydogs
I I have just been given a HS2 carb complete which was taken off a running car,if i fit this carb to my 950 engine, will i have to change anything or will it be a staight swop. The carb on car now is a H2.
Re: su h2 carb seals
Posted: Fri Sep 13, 2013 7:47 pm
by bmcecosse
Swap the needle..... although difference will be minimal...
Re: su h2 carb seals
Posted: Fri Sep 13, 2013 11:02 pm
by mike.perry
Both carbs use an M needle