Page 1 of 1
MM front bumperframe
Posted: Sun Sep 01, 2013 6:55 pm
by TvdWerf
I had a later bumper on my car, but found an MM / series II bumperblade in acceptable condition.
But the inside part does not fit very well, is this normal?
Or is the inside part from the MM / series II bumper different?
Re: MM front bumperframe
Posted: Sun Sep 01, 2013 9:41 pm
by DAVIDMCCULLOUGH
The lowlight split bumper one has a more curved section in the middle than the later one piece bumper. I would take a picture but lost my camera at the LCV 60 event at Gaydon........
Re: MM front bumperframe
Posted: Mon Sep 02, 2013 4:42 am
by mike.perry
For the lowlight you need to fit the complete assembly, valances, blades and fillet. The split bumper was only fitted to lowlights.
The later Series MM/early Series II has a different valance to the Minor 1000 but the blade is the same shape apart from two fixing holes being closer together. This is so that the overiders fitted to the 4 door do not obscure the sidelights