Morris Minor Owners Club

looking for complete lights for the front of my series 2

bowls,gaskets,lenses etc

can anyone tell me if these will deffenatly fit and is this a good price thanks in advance!

http://www.ebay.co.uk/itm/121041063280? ... 1438.l2649

yes they will

brilliant thanks alot

But not inexpensive........... Have you compared costs elsewhere?

comparable considering what you get

Can do it for just over half the cost - search ebay.

doubt it for what you get like for like

i also need some rear light bases but apparently they are sided?

i have found these on ebay which say can be used with or without the plinths but will they be ok?

i need the ones for use without (bolt straight to the body)

http://www.ebay.co.uk/itm/Stop-Tail-Lig ... 4cfe8c3f14

AndrewT wrote:looking for complete lights for the front of my series 2

bowls,gaskets,lenses etc

can anyone tell me if these will deffenatly fit and is this a good price thanks in advance!

http://www.ebay.co.uk/itm/121041063280? ... 1438.l2649

Got these headlamps from here. They also to the bowls etc.

Headlights are very good, have used them for over a year without problem. Straight wired to original switch (should probably go via relay - but working ok);

http://www.ebay.co.uk/itm/MORRIS-MINOR- ... 27be629a90

AndrewT wrote:i also need some rear light bases but apparently they are sided?

i have found these on ebay which say can be used with or without the plinths but will they be ok?

i need the ones for use without (bolt straight to the body)

http://www.ebay.co.uk/itm/Stop-Tail-Lig ... 4cfe8c3f14

Series 2 lights mount on painted plinths and are not handed, its the plinths which are. Early Minor 1000s had a bigger handed chrome base and didn't need a mounting plinth. No reason why you can't use the early 1000 type on a Series 2 - many do and few would notice the subtle difference!