Page 1 of 1
Oil Change- what grade??
Posted: Mon Jun 17, 2013 5:45 pm
by bloodyank
It's a 1300 from a Marina (I think). What grade and quantity should I add?
Also, my dipstick fits very loosly in it's hole.. is this normal?
Thanks, mates!
Re: Oil Change- what grade??
Posted: Mon Jun 17, 2013 6:01 pm
by lambrettalad
you need a good quality 20 50 silko-lean castrol
halfords?
you may wish to re phrase the second part of your post
Re: Oil Change- what grade??
Posted: Mon Jun 17, 2013 6:23 pm
by bmcecosse
20W50 from Wilko or Morrisons etc is perfectly good for a marina engine. Just don't expect it to last for ever. You'll need the full 4.5 lire can. The dipstick should not be loose - oil will blow out. There should be a plastic sleeve with a tapered entry for it.
Re: Oil Change- what grade??
Posted: Mon Jun 17, 2013 10:26 pm
by JOWETTJAVELIN
Oil and filter change every 3,000 miles. The dipstick should slide in and out without hindrance. As long as it stays put, covers the hole and is the correct one marked with the correct levels all should be fine.
And how did you get hold of a Marina engine over there? From an Austin Marina or was the car exported?
Re: Oil Change- what grade??
Posted: Mon Jun 17, 2013 11:08 pm
by bloodyank
Alex-- good one! Definitely should have re-read that post!!!
Car was imported over here in 07..Just now having a go at restoring the old boy. Limited time and budget make it slow going, though.
My oil filter is on top of the block facing down. Hoping it doesn't make a big mess getting it off. Guess I'll drain the oil first..(Duh)
Re: Oil Change- what grade??
Posted: Mon Jun 17, 2013 11:23 pm
by bmcecosse
Sorry - didn't notice USA location
So yes - any basic 20W50 oil will be fine - 4 quarts in your terms !