Page 1 of 1
New clutch today but......
Posted: Thu May 30, 2013 5:56 pm
by lambrettalad
I just had fitted a new 1098 clutch kit (from moggie centre in black country )
foot on clutch 3/4 way down great lovely and smooth changing gear is like a baby's bottom
BUT clutch all the way down terrible rattle and can't get gears without awful crunching sound
is it over adjusted?
hints and solutions very very welcome
Re: New clutch today but......
Posted: Thu May 30, 2013 5:58 pm
by lambrettalad
Re: New clutch today but......
Posted: Thu May 30, 2013 7:09 pm
by lambrettalad
NO
now its over adjusted the other way and slipping,roll on friday
Re: New clutch today but......
Posted: Thu May 30, 2013 7:41 pm
by bmcecosse
Should have about 1" free play at the pedal - and is the return spring fitted? Simple answer to 'all the way down' problem is to fit a rubber stopper on the floor under the pedal to stop it going down more than it needs to.
Re: New clutch today but......
Posted: Thu May 30, 2013 8:26 pm
by John.n
a rubber block does seem a little crude but effective I guess.
Is it a diaphragm type or not?
Regards,
John
Re: New clutch today but......FIXED
Posted: Fri May 31, 2013 5:16 pm
by lambrettalad
Blooming spring on the wrong way
but now
Re: New clutch today but......
Posted: Fri May 31, 2013 6:02 pm
by mogbob
Result !! Well done.
Bob
Re: New clutch today but......
Posted: Fri May 31, 2013 8:24 pm
by mike.perry
Better than putting the clutch release forks on the wrong way round... Now that is silly