Page 1 of 1
New noise...
Posted: Wed May 08, 2013 8:15 pm
by Arthurdaily
Whilst messing with my vacuum advance, I noticed that my engine makes a sort of... rattle noise sometimes, not when revved steadily or anything, or at idle, but just when starting to rev. I can't detect where it's coming from. Oil pressure is around 5060 psi during rev, compression 160 + in each clylinder, timing generally okay I think, mixture good (brown plugs)... what could it be?
Please say the timing chain!
I have videoed it using new videographing-camera techn knowlogee.
Here is the ewe toob link:
You can hear it well from 20 seconds into clip...
http://www.youtube.com/watch?v=m0Y1N8y7 ... e=youtu.be
Re: New noise...
Posted: Wed May 08, 2013 9:53 pm
by bmcecosse
Oil pressure of 5060 psi is slightly on the high side............

Re: New noise...
Posted: Wed May 08, 2013 9:56 pm
by Arthurdaily
50 / 60
Re: New noise...
Posted: Wed May 08, 2013 10:13 pm
by les
I reckon it's the vacuum/advance! ------sorry only joking.

Re: New noise...
Posted: Wed May 08, 2013 10:19 pm
by Arthurdaily
lol
Re: New noise...
Posted: Wed May 08, 2013 10:27 pm
by bmcecosse
Slight pinking as the engine accelerates?
Re: New noise...
Posted: Wed May 08, 2013 10:30 pm
by Arthurdaily
- is that based on the you tube clip? Just wondering if anybody else could actually see it.. Ithought you could only get pinking when driving and engine under load? I have, however, been messing with the advance ...
Re: New noise...
Posted: Wed May 08, 2013 10:46 pm
by irmscher
probably the chain gone slack try a Duplex set up Mathew
Re: New noise...
Posted: Wed May 08, 2013 10:46 pm
by bmcecosse
Can't play the Tube....... Retard slightly - has the noise gone away?
Re: New noise...
Posted: Wed May 08, 2013 10:50 pm
by Arthurdaily
Did you play the clip Lee? I will try a little retardation tomorrow and see what happens... whilst blipping the engine with the vacuum tester on. I shall then report back!
Re: New noise...
Posted: Thu May 09, 2013 11:51 pm
by irmscher
you cant really tell with the video bring it round after you have finished at the school

Re: New noise...
Posted: Sat May 11, 2013 9:10 pm
by Arthurdaily
Sorted it Lee, but thank you - it was the fan clipping a pipe only!