Page 1 of 1
interia panels
Posted: Wed Apr 10, 2013 8:26 pm
by boydogs
The parcel shelf and the side panels are in bad condition and need replacing, anyone know what material i could use and then possibly paint red. Thanks, boydogs.
Re: interia panels
Posted: Wed Apr 10, 2013 8:27 pm
by lambrettalad
i used hardboard,works well
Re: interia panels
Posted: Wed Apr 10, 2013 10:04 pm
by les
I think the type of material with the textured finish is millboard. You can buy the parcel shelf at a reasonable price.
Re: interia panels
Posted: Thu Apr 11, 2013 12:09 pm
by boydogs
Thankyou for reply`s i thought about using hardboard, will try this first while i check Millboard as sugested. Thanks again boydogs.
Re: interia panels
Posted: Thu Apr 11, 2013 4:35 pm
by Declan_Burns
I covered mine in cherokee red leatherette and used pipe lagging from the DIY to cover the Crash pad. The parcel shelf itself is plywood.
Regards
Declan[frame]

[/frame][frame]

[/frame]
Re: interia panels
Posted: Fri Apr 12, 2013 12:58 am
by David W.
One car I cut the parcel shelf from a 2x4 piece of 1/4 inch plywood and covered it with felt. Don't like it much, the felt gets dirty.
On the other, I stained the plywood and coated with polyurethane. Looks nice and cleans easily.
Re: interia panels
Posted: Sun Apr 14, 2013 6:01 pm
by boydogs
Declan, Thanks for photo the shelf looks v/good in red, also the car inside looks great. boydogs
Re: interia panels
Posted: Mon Apr 15, 2013 4:51 am
by George Smathers
Nice wheel Declan.
George