Page 1 of 1
Ride height
Posted: Mon Feb 18, 2013 8:53 pm
by fillpoke
Could anyone please tell me the measurement from the bottom centre of the front wing (above the wheel) to the ground. Also the same for the centre of the rear wing to the ground. Many thanks for any help.
Re: Ride height
Posted: Tue Feb 19, 2013 6:55 am
by bmcecosse
It's all in the workshop manual! If you don't have a copy - PM me.....
Re: Ride height
Posted: Tue Feb 19, 2013 4:22 pm
by Matt Tomkins
bmcecosse wrote:It's all in the workshop manual!
very helpful
in the 'general data' section of the manual, ground clearance is given as 6 3/4 in.
i can't see anything else atm, perhaps BMC might enlighten us as to where in the manual this information is available
Re: Ride height
Posted: Tue Feb 19, 2013 6:07 pm
by bmcecosse
I don't think it is for you Matt to criticise my answers.... It was the best I could manage at 6.55 am while rushing out to an appointment. It would hopefully guide the poster to look it up in the Manual. While the specific data requested is not listed anyhwere that I know of, the ride heights from the ground to chassis points front and rear ARE listed in the Manual on page R 16, and this is the information that should be used to set ride height correctly. The wings are not fixed body points - the chassis IS.
Re: Ride height
Posted: Tue Feb 19, 2013 9:55 pm
by welshrat
Now, Now children, lets not have any squabbles tonight!
Re: Ride height
Posted: Thu Feb 21, 2013 11:11 am
by irmscher
I wouldnt bother Roy with your great knowledge and help you give everyone obviously Tomkins nows best
