Morris Minor Owners Club

hi all , i need a replacement block water outlet flange for my 1952 918cc sidevalve , its the diecast flange that attaches the bottom radiator hose to the block , my car was not fitted with heater , the only new ones ive seen are the flanges that just have a drain tap , this is the last thing i need to complete my engine rebuild , atb steve

I have a choice of sound used ones here in Melbourne, Australia, some alloy and one steel as I recall. One could easily be posted. Will round-up the ones I have and take photos in about 10 hrs. Not sure how to post them here though........Phil

[frame][/frame]
Actually it is a water hose inlet elbow, water flows in through the bottom hose, is heated and flows out through the top hose.
Have you tried MMOC Club Spares?

'hi mike i contacted bryan and he kindly looked in his stock but unfortunatly there is only types fr pumped engnes , if esm cant help either i think i might get one fabricated in stainless till i can locate the genuine , i can see this part being the holy grail lol , thanks phill for looking downunder - steve

hi all , i have bought a new outlet elbow fron ian harris morris spares , what a nice chap he is, his forte is prewar morris and stuff ,alot of the engine parts are generic from the cars he services ,he had a new made elbow it has a slightly differce in the angle but fits a treat and only £ 25 ,so looks like we will be going to the ball lol atb steve

What you have is an elbow from a Morris 8. As long as it fits its ok

hi , it does fit fine , different exit angle but the car is not concourse , i got it in 24 hours and is better than the rot riddled one i had ,being a hot rodder at heart i was tempted for 1 -2 milliseconds to fit a nice zetec with bike carbs LOL--not realy -steve

hi , went to brooklands autojumble today ,got water elbow £2 and timing cover £2 from same guy , "result"