Morris Minor Owners Club

Evening all I'm a little confused here, I've got my new stainless two piece exhaust here i also got new clamps is there different types of clamps for the later minor? That bolt to the body work, I will try post pic up with what i have now hope someone can help thanks rob.

Old type now[frame][/frame]

New ones

.

The rubber loop you show is a very non-standard exhaust mount....

Thats what i was worried about is it in the same area where should go?

Wont let me upload new ones

Does anybody have any pics that u cam see where clamps should be?

Clamps are just to connect the parts together - you should have a couple of hangers = one roughly where you show the picture and the other at the rear behind the axle.

Ok the rear one is where its spose to be, where is the middle hanger suppose to bolt to?

Pretty much where that loop is - but is normally a length of hanger strap fixed to the floor and then to the U clamp. It's nothing special.

Is it the bigger one out of these two? Hopefully should just bold to same hole

[frame][/frame]

Those are the correct fixings for the exhaust. Don't tighten the U clamps too tight!!