Page 1 of 1
Engine Information
Posted: Thu Nov 29, 2012 3:04 pm
by cmec
Where can I obtain information on my engine, or can anyone tell me please I have established that it is a 1098cc. I particularly would like the year on manufacture and any other info would be most appreciated.
Engine Number is 10MA-U-H5514
Thanks
Re: Engine Information
Posted: Thu Nov 29, 2012 3:43 pm
by POMMReg
Autumn '69 - from a c1255xxx Minor(?)
Does that make sense?
Chris
POMMReg
Re: Engine Information
Posted: Thu Nov 29, 2012 5:40 pm
by cmec
Sorry, forgive me no it doesn't.

Re: Engine Information
Posted: Thu Nov 29, 2012 6:34 pm
by bmcecosse
What else do you need to know - it's a 1098!! And seemingly 'high'

compression.
Re: Engine Information
Posted: Thu Nov 29, 2012 6:42 pm
by cmec
Is that all I need, 1098cc 1969 vintage, as I need a new distributor and I'm told they vary.
Re: Engine Information
Posted: Thu Nov 29, 2012 7:17 pm
by IslipMinor
10MA-U-H5514 would suggest an early 1098 engine, c1962/3? If it is the early engine, then the distributor is a Lucas 25D4 spec 40849B.
The later engines were also a 25D4, but the spec was either 41124 or 41148 (the actual advance characteristics are the same).
The spec is stamped into the distributor body.
Re: Engine Information
Posted: Thu Nov 29, 2012 7:55 pm
by les
No one knows what number in degrees was stamped on the foot of the cam when it left the factory!
Re: Engine Information
Posted: Thu Nov 29, 2012 8:09 pm
by bmcecosse
The 45D is a much better dizzy - so go for that. SimonBBC or Accuspark will see you right. The engine spec never changed -so why would the dizzy?
Re: Engine Information
Posted: Thu Nov 29, 2012 8:40 pm
by IslipMinor
The engine spec never changed -so why would the dizzy?
The data comes directly from the 14th edition of the Morris Minor Workshop Manual.
Re: Engine Information
Posted: Thu Nov 29, 2012 8:43 pm
by POMMReg
Apols, had the '189E' on my brain for some reason!!
Ooops!
1962/3 is correct for 10MA-U-H 5xxx.
Blame it on old age & Morris Z vans!
Chris
POMMReg
Re: Engine Information
Posted: Thu Nov 29, 2012 11:24 pm
by cmec
Thank you all for the information, I am at least a little bit wiser on the history of my engine. It also helps me to chose a suitable replacement distributor, I think.

Is the workshop manual (14 edition?)available on line.
Re: Engine Information
Posted: Fri Nov 30, 2012 12:10 am
by bmcecosse
Re: Engine Information
Posted: Fri Nov 30, 2012 3:22 pm
by les
-------unless your the tax man!
Re: Engine Information
Posted: Fri Nov 30, 2012 4:17 pm
by cmec
OK, a bewildering array of distributors from SimonBBC and Accuspark so is it, "contacts or no contacts that is the question."
Re: Engine Information
Posted: Tue Dec 11, 2012 5:20 pm
by bmcecosse
I see nothing wrong with points - it's up to you - but I do suggest a 45D is better than the old 25D.