Bonnet ID
Posted: Wed Sep 26, 2012 9:11 pm
Do you think this is an early bonnet or the common later type?[frame]
[/frame]
Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
Bonnet ID
Page 1 of 1
Re: Bonnet ID
Posted: Wed Sep 26, 2012 9:18 pm
Different angle[frame]
[/frame]
Re: Bonnet ID
Posted: Wed Sep 26, 2012 9:23 pm
has it got a Vshaped backend?
Does it fit right up to the doors or is there a gap?
Does it have Minor 1000, Morris Minor or holes for badges on on the side of the bonnet?
Meanwhile you have posted another photo, it is a 1956> Minor 1000 bonnet
Does it fit right up to the doors or is there a gap?
Does it have Minor 1000, Morris Minor or holes for badges on on the side of the bonnet?
Meanwhile you have posted another photo, it is a 1956> Minor 1000 bonnet
Re: Bonnet ID
Posted: Wed Sep 26, 2012 9:29 pm
From the profile of the rear edge, I'd say it's the later type bonnet, BUT, it's the not so common LCV version, (unless the holes for the side mouldings have been filled in).
Re: Bonnet ID
Posted: Wed Sep 26, 2012 9:31 pm
Thank you Mike.
Spotted it on ebay and thought it may be of interest but could not quite work it out as badges are different and there does not appear to be any side mouldings.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... TQ:GB:1123
Spotted it on ebay and thought it may be of interest but could not quite work it out as badges are different and there does not appear to be any side mouldings.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... TQ:GB:1123
Re: Bonnet ID
Posted: Thu Sep 27, 2012 11:24 am
LCV bonnet with early/LCV badge and car handle