Changed brake shoes - some oil came out

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
hanvyj
Minor Fan
Posts: 302
Joined: Mon May 30, 2011 10:52 pm
MMOC Member: No

Changed brake shoes - some oil came out

Post by hanvyj »

I changed the rear brake shoes, while I was wrestling with the spring some oil kind of just splodged out of the hub... There didn't seem to be any oil in that area but afterwards I noticed there has been a bit of a leak.

I'm worried because its pretty much going to leak into the brake drum! Is this normal or do you think I have broken the seal in the hub?

Also, any tips for getting the countersunk screw of the hub out? Its just one of those toffee metal ones that disintegrates when you try to use a screwdriver...
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Changed brake shoes - some oil came out

Post by bmcecosse »

Just wipe it up. Impact driver is the real answer for these screws if being difficult.
ImageImage
Image
hanvyj
Minor Fan
Posts: 302
Joined: Mon May 30, 2011 10:52 pm
MMOC Member: No

Re: Changed brake shoes - some oil came out

Post by hanvyj »

Thanks, Yeah I've been hearing about impact drivers, night have to invest in one...
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Changed brake shoes - some oil came out

Post by mike.perry »

The countersunk screw is damaged because it has been used to tighten the drum when it is a retaining screw. The drum should be fitted and tightened using the wheel nuts, then the screw is fitted and the wheel nuts removed. That way the screw will not be damaged
[sig]3580[/sig]
Post Reply