Morris Minor Owners Club

Could anyone help me with details of the Master and slave cylinders required to change my cable operated clutch to hydraulic operation. I have a 1964 Pick Up fitted with the Fiat 1585 cc twin overhead cam engine and Fiat 5 speed gearbox. Any advice or pictures would be appreciated. Thanks John.

You might be better asking here:

http://guy-croft.com/

or here:

http://turbo124.com/forum/

i have a hydraulic clutch on my twin cam
easy job use the same slave as off a midget or similar and i am using the metro peddle box this gives you the reservoir
will take some pic if you want .

Thanks for the replys. I would appreciate any photoes and information on the slave cylinder installation and linkage to the clutch arm. I do have a Marina pedal box and a spare Master cylinder that I can Fit, the only thing thats put me off is having to move the brake pipes which cross over where the master cylinder should be. Thanks John[frame][/frame]

I suspect moving a couple of brake pipes is the very least of the work!