noisey van exhausts
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
noisey van exhausts
hi,my new van had this old rotten exhaust on it and i was sure the baffles in the box must have rotted away ,it was so noisey,so i purchased a nice shiney stainless one,now it may be me getting old but its just as bad,when i was 17 running around in my 105e with peco exhaust i liked noise but now im in my smoking jacket and slippers i like smooth and quite,i was thinking of putting a extra box in the straight section in the middle,anyone know a ideal box?
-
- Moderator
- Posts: 7679
- Joined: Fri Nov 01, 2002 2:55 pm
- Location: LEAMINGTON SPA
- MMOC Member: No
the stainless sytems are often complained about due to being louder than standard.
I would guess an extra box wuld help - might be an idea to look through practical classics etc.. to see if there are any specialist exhaust places advertised - I wouldn't expect a decent stainless additional silencer from the well known tyre/exhaust centres as it is not common enough.
I would guess an extra box wuld help - might be an idea to look through practical classics etc.. to see if there are any specialist exhaust places advertised - I wouldn't expect a decent stainless additional silencer from the well known tyre/exhaust centres as it is not common enough.
-
- Minor Addict
- Posts: 754
- Joined: Fri Apr 16, 2004 10:10 pm
- Location: london
- MMOC Member: Yes
-
- Minor Addict
- Posts: 754
- Joined: Fri Apr 16, 2004 10:10 pm
- Location: london
- MMOC Member: Yes
-
- Minor Legend
- Posts: 3204
- Joined: Tue Feb 12, 2002 12:00 am
- Location: S E London
- MMOC Member: No
noise
I find the standard exhaust system too noisy on all Minors and,
stainless steel are usually even worse. I experimented by
adding the mild steel silencer from the old system into my new
one and found it made a considerable improvement. It didn't
last long though so I resorted to having a special stainless one
made up to my specifications. Works a treat but the special
silencer cost as much as the whole stainless system,but,as it is
stainless I don't expect to ever have to replace it.( It is a straight-
through type to avoid excessive back pressure).
stainless steel are usually even worse. I experimented by
adding the mild steel silencer from the old system into my new
one and found it made a considerable improvement. It didn't
last long though so I resorted to having a special stainless one
made up to my specifications. Works a treat but the special
silencer cost as much as the whole stainless system,but,as it is
stainless I don't expect to ever have to replace it.( It is a straight-
through type to avoid excessive back pressure).
Willie
[img]http://i39.photobucket.com/albums/e197/wuzerk/mo9.jpg[/img]
[img]http://i39.photobucket.com/albums/e197/wuzerk/mo9.jpg[/img]