Page 1 of 1
Steering Track Rod End Thread Size
Posted: Wed Aug 15, 2012 4:50 pm
by BigDawgV8
Hi Y'All,
Does anyone know what thread the steering rack track rods are? The bit that the track rod end screws onto.
Thanks for the help
Re: Steering Track Rod End Thread Size
Posted: Thu Aug 16, 2012 11:33 am
by mike.perry
9/16 < 948, 5/8 = 1098
Re: Steering Track Rod End Thread Size
Posted: Thu Aug 16, 2012 10:02 pm
by les
I suspect it's the thread type he needs. If you could ask for a bsf and unf bolt/set screw of that size and compare or even buy a couple of nuts that would tell you. Or check the tpi and phone a supplier for info.
Re: Steering Track Rod End Thread Size
Posted: Mon Aug 27, 2012 5:00 pm
by bmcecosse
UNF
Re: Steering Track Rod End Thread Size
Posted: Wed Aug 29, 2012 10:15 am
by mike.perry
9/16 BSF, 5/8 UNF. See topic on Series MM messageboard
Re: Steering Track Rod End Thread Size
Posted: Sat Sep 01, 2012 7:11 pm
by BigDawgV8
Thank you all for the replies.
Much appreciated.