sump seals
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
sump seals
Does anyone know where can you get a set of Cork crankshaft seals from or the dimensions of the two bits of cork ?
-
- Minor Addict
- Posts: 550
- Joined: Wed Jul 28, 2010 9:39 am
- Location: Netherlands, Drenthe
- MMOC Member: No
Re: sump seals
try this one:
http://www.ebay.nl/itm/200344914447?ssP ... 1497.l2649
http://www.ebay.nl/itm/200344914447?ssP ... 1497.l2649
MM '51 LHD sidevalve
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: sump seals
From my experience you should be OK with Gaskets for Classics products
[sig]3580[/sig]
-
- Minor Legend
- Posts: 1460
- Joined: Sun Sep 25, 2011 6:32 pm
- Location: Clacton On Sea, Essex, ENGLAND.
- MMOC Member: Yes
-
- Minor Fan
- Posts: 124
- Joined: Thu Jun 09, 2011 12:29 pm
- MMOC Member: No
Re: sump seals
MMOC stock has these sump sets, I have just recently bought them, contact Bryan Gostling.
Colin
Colin
-
- Minor Legend
- Posts: 1460
- Joined: Sun Sep 25, 2011 6:32 pm
- Location: Clacton On Sea, Essex, ENGLAND.
- MMOC Member: Yes
-
- Minor Fan
- Posts: 124
- Joined: Thu Jun 09, 2011 12:29 pm
- MMOC Member: No
Re: sump seals
Hi
As a follow-up to the cork seal availability, does anyone have advice to fitting please. Should I use a sealer to seat the cork onto. And is there a trick for cutting to the right length?
thanks for the help
Colin
As a follow-up to the cork seal availability, does anyone have advice to fitting please. Should I use a sealer to seat the cork onto. And is there a trick for cutting to the right length?
thanks for the help
Colin
-
- Minor Fan
- Posts: 231
- Joined: Fri May 02, 2008 10:39 pm
- Location: Welland, (Niagara Region) Ontario, Canada
- MMOC Member: No
Re: sump seals
What I have heard is that the seals ARE the right length. Don't cut them! That said, when last I fitted bottom end gaskets to my MM the machine shop owner where the work was being done refused to believe that so much protrusion was right.
They cut the cork seals - and the engine leaks!
They cut the cork seals - and the engine leaks!
Fussyoldfart in Welland Ontario.