Page 1 of 1

Fuel gauge not working

Posted: Wed Jul 25, 2012 10:48 pm
by beero
Now I have got her on the road (at long last) I found the mileometer didn't work (damn)
Speedo out, took it apart, found a small clip on the detent out of place, clipped it back in, job done! Brilliant - or so I thought.
Put the speedo back in - fuel gauge not working. (damn and blast!)

Speedo out again. After a couple of hours testing everything I found the second coil in the gauge goes to earth and it will not work unless the speedo is earthed. My speedo is screwed into a nicely painted dash and it was earthing via the speedo cable, which I didn't attach because the fuel gauge didn't work!! ARGHHHH!!!

On further investigation the main beam warning lamp and the speedo illumination lamps didn't work without the speedo cable attached either! Didn't notice that earlier or all would have been clear.

Re: Fuel gauge not working

Posted: Thu Jul 26, 2012 5:03 pm
by bmcecosse
You should arrange a better direct earth - don't rely on the cable.

Re: Fuel gauge not working

Posted: Thu Jul 26, 2012 11:35 pm
by beero
Yes, done that Roy, more of a warning so nobody makes the same stupid mistake.

Re: Fuel gauge not working

Posted: Fri Jul 27, 2012 11:15 pm
by bmcecosse
It's not the mistakes that are important - it's what you learn from them that makes the difference in the long term.