Morris Minor Owners Club

I have found a 3 diget number on the square shaft after tacking the complete handle and lock off.At the moment I have no key so can't lock the boot.
Can I get a new key with just the 3 figures or should it have FS or FP in front? Also where do I get a key as the number is not similar to any advertised by the usual parts people.
Thanks.

hi I many old keys on numbered boards at auto fairs /jumbles,if your lock is still out why not take it with you?
good luck

try your door lock in the boot not to lock it etc but to try the profile of the blank, if it fits and your key is an fs or fp then least you know the blank type, then post this with the 3 numbers and if someone on here has the same key maybe they would be kind and get one cut from thier local key cutting shop and send it to you, also you can make the lock fit the keys you have check this post http://www.mmoc.org.uk/viewtopic.php?f=6&t=43727
good luck matt.

TringTring try contacting Morris Suppliers : ESM, Bull Motif or Tom Roy. Most stock new keys just quote the number you require.