Page 1 of 1
Minor Problems
Posted: Thu Jul 12, 2012 2:34 pm
by JoelL6895
I am 16 and renovating a morris minor split screen. The speedo was broken when i bought it and i have now purchased a replacement, i have placed all the fitting back in but the new one doesn't work! Could anyone give me help into how i can fix this problem?
Re: Minor Problems
Posted: Thu Jul 12, 2012 3:13 pm
by chesney
It could be the speedo cable or pinion that is broken. You can test speedos are working by running them (backwards/anticlockwise) with an electric drill. Try pulling the cable off the gearbox end and getting a helper to attach a drill (by the chuck) to the cable at the speedo end while you watch the gearbox end (drills are very important tools for speedos ;)). If it doesn't spin, or doesn't spin when you hold it, it is the cable. Or it could simply be that the speedo cable is not pushed far enough into the speedo head.
Re: Minor Problems
Posted: Thu Jul 12, 2012 5:28 pm
by charlie_morris_minor
send me your email address in a PM and I can let you have a pdf manual on stripping and rebuilding a speedo
Re: Minor Problems
Posted: Fri Jul 13, 2012 4:59 am
by mike.perry
Have you got the large speedo in the middle of the dash or the small one in front of the driver? Which ever you have, make sure that the replacement has the same TPM, the four figs after the serial no. on the dial as the original or the gearing will be wrong. If the car is a Series 2 with the original engine and box the TPM should be 1000