Page 1 of 1
Penulty regarding type of tyres
Posted: Wed Aug 04, 2004 1:32 pm
by Leyland
Bill
I have aposting in 'other' regarding the question of radial versus crossply tyres. Interesting comments!
I f the car was being shown (which i hope to when complete) would there be a penulty regarding the tyres if the car has radials which of course were not original fitment?
Ty
Posted: Wed Aug 04, 2004 6:57 pm
by Chris Morley
For concours there would be a points penalty.
However, you could have two sets of wheels, one set fitted with radials (everyday use) and one set of crossplies for showing.
Posted: Tue Aug 10, 2004 7:53 pm
by Judge
Leyland, sorry for the delay. If crossply tyres were specified for your car and you fit radials, there is a penalty of 2 marks. There is also an additional 2 mark penalty if the wrong valve caps are fitted.
However don't let this frighten you off. If you would like a full set of rules, just let me know.
Posted: Tue Aug 10, 2004 10:37 pm
by Cam
Judge wrote:If you would like a full set of rules, just let me know.
Actually Bill, I would not mind a set of rules purely out of interest if at all possible. I know my car is WAY off concours, but I would be interested to know all the nitty gritty details of the points system.
Thanks.
Posted: Wed Aug 11, 2004 8:52 am
by rayofleamington
Valve caps!! Crumbs - i think that's put me off concours again!
I didn't even know there was a 'correct' type.
Posted: Thu Aug 12, 2004 8:51 pm
by Guest
rayofleamington wrote:Valve caps!! Crumbs - i think that's put me off concours again!
I didn't even know there was a 'correct' type.
Actually Bill, I would not mind a set of rules purely out of interest if at all possible.
Not a problem Cam, just let me know your address and I will put one in the post.
Posted: Thu Aug 12, 2004 10:32 pm
by brixtonmorris
hey judge.
can i also have a set of rules
Posted: Thu Aug 12, 2004 10:50 pm
by Cam
Thanks very much Bill, I have sent you a PM (private message) with my address.
Oh and actually, it's in Minor Matters too as I am the branch contact for the Potteries branch (area 10).
Posted: Mon Feb 06, 2006 12:07 pm
by markattard
Would it be nice to have a set of rules we can download...
Posted: Mon Feb 06, 2006 12:44 pm
by simmitc
Yes it would. Might generate a bit more support too.
Posted: Mon Feb 06, 2006 7:22 pm
by Judge
markattard wrote:Would it be nice to have a set of rules we can download...
Good idea, I will see what can be done.
Posted: Mon Feb 06, 2006 10:13 pm
by brixtonmorris
were waiting
Posted: Mon Feb 06, 2006 10:28 pm
by bigginger
Sounds great - I'd be fascinated to see them.
Posted: Mon Feb 06, 2006 10:30 pm
by Scott
I'm just curious about these valve caps.......
Posted: Tue Feb 07, 2006 12:53 am
by chickenjohn
Yes, I'd like a copy of the rules too, and I'd like to know what loses marks at concours in terms of underbody repairs, welding etc....
Posted: Mon Feb 13, 2006 11:20 am
by Kevin
I'm just curious about these valve caps.......
I can answer that one they should be of the metal type and not the modern plastic ones.
Posted: Mon Feb 13, 2006 10:04 pm
by Scott
Ah, that's cleared that up then.
Thanks Kevin
.
I'll have to go & buy some new ones now to replace my black plastic ones
.
Posted: Tue Feb 14, 2006 9:37 am
by Judge
Scott wrote:Ah, that's cleared that up then.
Just so that there is no mistake, they should be of the Shrader type, without the valve removal tool.
Hope this helps.
Posted: Tue Feb 14, 2006 9:49 am
by Welung666
Just out of interest Judge, did you manage to sort out a copy of the concours rules? If you need them typing up on Acrobat or Word my eldest will happily type them up (as part of her college coursework) as she's doing a touch type course. And it would keep her out of my hair for a few hours
Lee