An update and some sad news
Posted: Mon Jun 25, 2012 8:09 pm
Hello all,
I've been away for a while, as the moggy lives down in Devon and I study up in Oxford, hence very little has happened in terms of progress in the last year.
I have got to the stage where I have decided to continue my studies to do a masters and then with some luck, a PhD. Hence my moggy project has to go as it will never get done, and i need all the cash i can get!
I would greatly appreciate it if some experienced people on the board could help to give me an idea of how much it is worth in its current state, which I shall describe for now but pictures will appear shortly once I have removed the dust sheets and swallow muck!
1957 4 door (clarendon grey) 948cc saloon. All necessary welding completed, including sills, spring hangers, nearside front chassis leg, inner wings, both rear floor pans, plus countless little bits and pieces. All properly cut out and welded in then seam sealed, zinc primed and waxoyled.
Fully rebuilt suspension, front and rear with polybushes, new trunnions, leaf springs etc.
Chassis stripped to bare metal and zinc primed, then 3 coats of cellulose primer.....this is how it currently stands
2 sets of rear wings, one set original, the other a set that need minimal repairing to make good
2 sets of doors, the originals plus another set in better nick.
All other parts, including a few new bits and pieces, are currently off the car and labelled bagged or boxed as the car was complete when I first got it.
I also have a lovely service book for it, detailing it was serviced at the same garage from new for well over 15 years, the original service voucher book also remains...with some vouchers still in it.
Original registration and current V5c are also present.
I know I will not get back the money I have spent on it, but I have learnt a lot from it. Once I have a decent set of pictures up and an idea of what to ask for it, I shall put it up for sale on the forum here. If it doesnt go, I will stick it on ebay.
Thanks.
YG.
I've been away for a while, as the moggy lives down in Devon and I study up in Oxford, hence very little has happened in terms of progress in the last year.
I have got to the stage where I have decided to continue my studies to do a masters and then with some luck, a PhD. Hence my moggy project has to go as it will never get done, and i need all the cash i can get!
I would greatly appreciate it if some experienced people on the board could help to give me an idea of how much it is worth in its current state, which I shall describe for now but pictures will appear shortly once I have removed the dust sheets and swallow muck!
1957 4 door (clarendon grey) 948cc saloon. All necessary welding completed, including sills, spring hangers, nearside front chassis leg, inner wings, both rear floor pans, plus countless little bits and pieces. All properly cut out and welded in then seam sealed, zinc primed and waxoyled.
Fully rebuilt suspension, front and rear with polybushes, new trunnions, leaf springs etc.
Chassis stripped to bare metal and zinc primed, then 3 coats of cellulose primer.....this is how it currently stands
2 sets of rear wings, one set original, the other a set that need minimal repairing to make good
2 sets of doors, the originals plus another set in better nick.
All other parts, including a few new bits and pieces, are currently off the car and labelled bagged or boxed as the car was complete when I first got it.
I also have a lovely service book for it, detailing it was serviced at the same garage from new for well over 15 years, the original service voucher book also remains...with some vouchers still in it.
Original registration and current V5c are also present.
I know I will not get back the money I have spent on it, but I have learnt a lot from it. Once I have a decent set of pictures up and an idea of what to ask for it, I shall put it up for sale on the forum here. If it doesnt go, I will stick it on ebay.
Thanks.
YG.