I'm toying with the idea of fitting an electronic speedometer in place of the standard one in the centre of the dash on my 68 Traveller - Any ideas as to what products are suitable for this application?
I am then thinking also that I would have a separate 2" gauge for the fuel gauge and also separate mountings for the warning lights. These could all be housed along with my other additional gauges - temp, voltage and oil pressure in the drivers storage compartment behind the steering wheel.
Any ideas greatfully received and I do appreciate this wouldn't appeal to the purists out there but then my car is pretty non-standard anyway with many modifications making it more to my liking as a daily driver.
Electronic Speedometer
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Electronic Speedometer
Last edited by jmcar on Fri Jun 22, 2012 3:45 pm, edited 1 time in total.
Re: Electronic Speedometer
Spelling corrected - thanks 

-
- Minor Legend
- Posts: 1989
- Joined: Wed May 10, 2006 1:47 pm
- Location: Aldershot
- MMOC Member: No
Re: Electronic Speedometer
what gearbox have you got? if you have a ford type 9 then..
http://www.ebay.co.uk/itm/Electronic-Sp ... 779wt_1037
and then the speedo head..
http://www.ebay.co.uk/itm/Programmable- ... 810wt_1037
i would imagine the most difficult part will be the speedo sensor if you do not have a type 9 box..
but it might be worth giving this guy on ebay a call..
http://myworld.ebay.co.uk/digitalspeedo ... 4340.l2559
http://www.ebay.co.uk/itm/Electronic-Sp ... 779wt_1037
and then the speedo head..
http://www.ebay.co.uk/itm/Programmable- ... 810wt_1037
i would imagine the most difficult part will be the speedo sensor if you do not have a type 9 box..
but it might be worth giving this guy on ebay a call..
http://myworld.ebay.co.uk/digitalspeedo ... 4340.l2559
Re: Electronic Speedometer
@charlie_morris_minor - perfect, just what I was looking for and yes I have the Ford type 9 gearbox so should be fairly straight forward.
I may give the guy a call though as I really would like a speedo head that is the same size as the original to fit in the hole in the dash 80mm is just over 3 inches I think which is on the small size, the original speedo looks around 5 inches? I'll go out and measure tomorrow
I may give the guy a call though as I really would like a speedo head that is the same size as the original to fit in the hole in the dash 80mm is just over 3 inches I think which is on the small size, the original speedo looks around 5 inches? I'll go out and measure tomorrow
