Page 1 of 1

Wiring loom for 1956

Posted: Sun Jun 10, 2012 7:49 pm
by mr2daniel
Hello everyone

I bought a wile ago a wiring loom at ESM for a 1956 2 door but i was trying to fit it this weekend and realise that the new loom is diferent,i am missing the wirring for the indicators relais.I have made some photos.
Any sugestions?

Very apreciated
Dan[frame]Image[/frame]New wiring loom[frame]Image[/frame] Old wiring loom and the wirings that i am missing on the new one.[frame]Image[/frame]

Re: Wiring loom for 1956

Posted: Sun Jun 10, 2012 10:13 pm
by bmcecosse
Send it back to ESM and ask them to send you the correct harness !

Re: Wiring loom for 1956

Posted: Sun Jun 10, 2012 11:13 pm
by mike.perry
A1956 Minor had trafficators not indicators which would have been added later unless it is an export? You need a harness for a 1962 Minor or check the Workshop Manual wiring diagram on pages N31 or N38

Re: Wiring loom for 1956

Posted: Mon Jun 11, 2012 7:25 pm
by JOWETTJAVELIN
As Mike says - 1956 cars did not have flashers. I think flashers arrived in 1961?

But then if you buy a later loom you might find additional wires or even ones missing (trafficators and differnt screen wipers for example).

Re: Wiring loom for 1956

Posted: Mon Jun 11, 2012 9:55 pm
by mr2daniel
Thank you all for the help,
Yes the mog is duch made by Molendijk Amesfort in Holland,
is a model in between the old 1956 and the new 1956.
No trafficators on it but the place for them is there.

Thank you
Dan

Re: Wiring loom for 1956

Posted: Mon Jun 11, 2012 10:16 pm
by mike.perry
Do not throw the old loom away, it is always useful for cutting out bits of wire of the correct colour code. You may be able to use the old wires for the relay