Page 1 of 1
hole size
Posted: Mon Apr 16, 2012 3:28 pm
by les
-------the hole diameter for the windscreen washer jets please, I need to buy some fibre washers for same, prefer to get them before starting the job.
Re: hole size
Posted: Mon Apr 16, 2012 9:05 pm
by simmitc
Depends on which jet assembly has been fitted. The washers are cheap, just pop into a proper hardware store or car spares place and buy a small selection, one of them will be sure to fit.
Re: hole size
Posted: Wed Apr 18, 2012 8:52 pm
by bmcecosse
I think 1/4" diameter won't go wrong.
Re: hole size
Posted: Wed Apr 18, 2012 9:28 pm
by les
I think you are right Roy, thanks. I thought i would be clever a while ago and used a valve stem rubber beneath the washer jets to give a seal. Unfortunately they have perished.