Parts needed

for those with Series MM sidevalve cars produced between September 1948 and February 1953
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
RTGSERVICES1
Minor Friendly
Posts: 18
Joined: Sun May 02, 2010 8:53 am
Location: Bristol / Puckeridge and all of the mainland UK
MMOC Member: No

Parts needed

Post by RTGSERVICES1 »

Hello

I am restoring a 1949 MM for myself and I am looking for a few bits and hope someone can help.

I need an oil pressure pipe and both engine and gear box rubber mounts.

Regards
Russell

Top
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Parts needed

Post by mike.perry »

A standard Smiths oil pressure gauge pipe will fit if you are not bothered about it being plastic.
For engine mounts use M1000 gearbox mounts.
Not sure about the availability of gearbox mounts.
Could I please have the details of the car for the register
[sig]3580[/sig]
Top
RTGSERVICES1
Minor Friendly
Posts: 18
Joined: Sun May 02, 2010 8:53 am
Location: Bristol / Puckeridge and all of the mainland UK
MMOC Member: No

Re: Parts needed

Post by RTGSERVICES1 »

Thanks for that, yes I will send you the details.

Regards
mike.perry wrote:A standard Smiths oil pressure gauge pipe will fit if you are not bothered about it being plastic.
For engine mounts use M1000 gearbox mounts.
Not sure about the availability of gearbox mounts.
Could I please have the details of the car for the register

Top
Post Reply

Return to “Series MM Register”