Page 1 of 1

metal sun visor problem

Posted: Sat Mar 24, 2012 1:59 pm
by madmoggy
Hello again,sorry to be a pest but this is a good site for getting answers.
I have just bought a second hand steel sun visor which seems too wide by about an inch,it is the correct shape and is quite old,it was sold for a morris minor.
Can anyone tell me if the morris oxford is slightly wider as I have my suspicions as to weather it should be for this instead.
Regards Si

Re: metal sun visor problem

Posted: Sat Mar 24, 2012 5:11 pm
by rocket3
Hi Si, i`ve just bought one for mine, give me a while and i`ll measure it and post them on here for you.Rob.

Re: metal sun visor problem

Posted: Sat Mar 24, 2012 5:34 pm
by madmoggy
Thanks Rob

Re: metal sun visor problem

Posted: Sat Mar 24, 2012 10:18 pm
by rocket3
Si, have just bought one on ebay from a guy in Bideford today, i`ve measured it length ways, in old money it`s a tad under 47 1/2 inches, ( forty seven and a half inches) or in euros 1205mm.hope this helps.

Re: metal sun visor problem

Posted: Sun Mar 25, 2012 4:02 pm
by madmoggy
Cheers, just measured mine and its 48 and 1/4 long. what a bummer.