Page 1 of 1

1098cc engine knock

Posted: Thu Mar 22, 2012 5:17 pm
by Tom1789
Hi, so last week i could smell a oil burning checked oil didnt read on dipstickso i topped it up, next day i drove it started knocking at high rev's
suspected shells, big end bearings, most had copper showing one was half worn out so replaced shells crank wasnt scored
put it all back togeather now i have a knock on tickover wich nearly stops in high rev's but has no power
checked cam and it has a small chip but shouldnt affect it

so now im stuck to what it could be anyone had similar problem before?

Thanks, Tom

Re: 1098cc engine knock

Posted: Thu Mar 22, 2012 8:23 pm
by bmcecosse
Obviously running with no oil on the stick hasn't done it any good. The rings may be seized in the pistons. Can only suggest a compression check as the first step to diagnose the problem.

Re: 1098cc engine knock

Posted: Thu Mar 22, 2012 8:50 pm
by JOWETTJAVELIN
oil didnt read on dipstick
I think we've found your problem.

:o

Re: 1098cc engine knock

Posted: Fri Mar 23, 2012 7:05 am
by kennatt
comp test then off with its head ,to have a look at the bores.

Re: 1098cc engine knock

Posted: Tue Mar 27, 2012 3:58 pm
by Tom1789
Problem is solved now crank had a crack in it bores and pistons was fine
thanks for suggestions :D

Re: 1098cc engine knock

Posted: Tue Mar 27, 2012 6:46 pm
by JOWETTJAVELIN
Good job... now check your oil more often! :D