Morris Minor Owners Club

Found these in ebay will they fit or are they too wide. http://www.ebay.co.uk/itm/400263633365?redirect=mobile

Too wide and looks like the pcd is not suitable.

no good. they're for modern minis. if they were for classic minis you could be in with a chance, but they're the wrong stud pattern, and too wide really.

They are 4 x 100 which is right 15 inches so low profile types would sort diameter difference so prob just to wide which is what i thought.

It does say in ad they are blank wheels and to allow 24 hrs for wheels to be drilled so maybe they can be drilled to correct PCD

4x100 is not right. If you buy any wheels for a standard minor you need 4inch pcd not 100mm.

Yeah, you want 4 x 101.6mm... 100mm won't last long. They may be able to drill them to 4 x 101.6 though, worth phoning or emailing to find out.

7 inches wide is pretty wide. 6 is the max really. You might have to use spacers and longer studs to bring the wheels out to clear the front swivel pins and trunions, and once it's spaced out sufficiently, you may find the rims then stick out of the wheel arches...

Flared arches are available though...

You've been told before I believe - 100 mm is not correct for a Minor. You must NOT attempt to fit 100 mm PCD wheels on a Minor.

I know i can't use 4x100 but if you read the ad they are blanks and get drilled for your size.

Also found these but been done so much
http://www.ebay.co.uk/itm/130610330689? ... 97.c0.m619

If they will indeed drill them for 4" PCD - great! Go for them!!