Alternator

[Bulldog]

Hello I have fitted the alternator and it is now - earth and done the dynamo Control box I must admit there is a bit of guesting there but from what I worked out I put the small wire from D and joined it to f and the earth to the body and the rest looks like they just joined together? Do that sound right? I am using all the old wiring it looked like it had big enough wires to do the job and it is Pull to start not keys as all the wiring I have seen seems to before key start thanks
Mike

[bmcecosse]

See the sticky at the head of this section - but yes that sound about right. The thick wire that was connected to the large dynamo terminal now goes to the battery connection on the 'pull start' switch.

[Bulldog]

Thank you
That's good then lol I have used the old control box and cut all the old copper tracks out on the back side so it looks gen when the bonnit is open
Mike

[bmcecosse]

Why on earth did you cut the tracks out ? No need to do anything like that!!!! Where did you get that advice? Main thing is - is the alternator charging the battery?