Page 1 of 1

New Owner

Posted: Tue Feb 21, 2012 7:57 pm
by Monster_Moggy
Hello,
I have recently purchased a Morris pickup and I am planning on restoring it.
The problem I have is that to send of for the log book I need to find the VIN number. I have looked all over the chassis and engine bay and cannont find it anywhere.
My number plate is OEG98F.
Could anyone tell me if there is a database with the VIN numbers, or if there is places that I would have missed when looking for the number.
Thanks

Re: New Owner

Posted: Tue Feb 21, 2012 8:40 pm
by Chock
Technically, it won't have a modern 17 character VIN number, since they only became standardised in the early Eighties, but its chassis number would be in the upper horizontal part of the radiator shroud, between the radiator and the wing panel.

Al

Re: New Owner

Posted: Tue Feb 21, 2012 8:48 pm
by Monster_Moggy
I found a 5 digit number here begining with AB is that it. does anyone know if a database with links between REG and Vin incase this AB number is not the correct one

Re: New Owner

Posted: Wed Feb 22, 2012 9:18 pm
by mike.perry
There should be a chassis plate on the engine compartment bulkhead, or four holes where the fixing screws were. You may find the chassis no. stamped into the bulkhead near the speedo cable. That is as near as you will get to a VIN on a Minor.
Since the chassis no was allocated at the factory and the reg. plate was issued by the dealer their is no relationship between the two, especially as reg. nos are often sold on to different cars.

Re: New Owner

Posted: Wed Feb 22, 2012 10:00 pm
by POMMReg
Do you have a cab number for it?!

You don't need a visable chassis number for pre-'78? vehicles - check dvla site!

Re: New Owner

Posted: Thu Feb 23, 2012 10:08 am
by Monster_Moggy
Thanks for the replies!

I do indeed have some holes where the chassis plate 'should' be!

I've found a 6 digit number on the rad shroud and i'll have a look by the speedo cable tonight!

Any ideas where the cab number would be?

Cheers

Re: New Owner

Posted: Thu Feb 23, 2012 1:24 pm
by POMMReg
Cab nos plate at the top of the n/s engine bay b/head - thin strip fixed by 2 self tapping screws.

Chris