Morris Minor Owners Club

I am fitting inertia reel seat belts to the front of my 1963 convertible and cannot figure out how to fix the shoulder fixing without welding a nut on to the door post and spoiling the interior paintwork which is in excellent condition.

You should be able to use a top mount positionin the same place as a 2 door saloon (part way back on the rail under the rear window)

Thanks Ray found it, may have a problem though because inertia reel must be fitted vertically, using top rail will probably leave it on an angle. also do you know the bolt size I should use.

you should be able to get inertia belts from Minor specialists that are suitable for the 2 door setup.. Otherwise the standard ones can be troublesome if you use them on an angle
Or you could look for some nice (period) static belts

Thanks for your advice Ray, two front seat belts (inertia reel) fitted and working fine.