hi , mate of mine has a spare mini engine would i be able to use the oil filter block to oil filter piece from this and would it be a straight swap as id rather have a spin on filter than the bolt on can thing, also would i just use a mini oil filter?
cheers
spin on filter
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Re: spin on filter
ok cheers will do this soon cheers
-
Trog
- Minor Friendly
- Posts: 52
- Joined: Sat Apr 10, 2010 8:40 am
- Location: Wimborne, Dorset
- MMOC Member: No
Re: spin on filter
Studs are shorter, you will need to extract longer mog ones and find the shorter version before you end up with half a job and a driveway covered in oil 
Graham
"The Morris Minor ECU is situated in the seat behind the steering wheel"
"The Morris Minor ECU is situated in the seat behind the steering wheel"
Re: spin on filter
so il have the mini stud of him aswell then? ive also sent the payment for the brakes cheers ;)
-
chrisryder
- Minor Legend
- Posts: 2217
- Joined: Mon Nov 15, 2010 11:44 pm
- Location: West Midlands UK
- MMOC Member: No
-
Trog
- Minor Friendly
- Posts: 52
- Joined: Sat Apr 10, 2010 8:40 am
- Location: Wimborne, Dorset
- MMOC Member: No
Re: spin on filter
Slooo down, the evolution towards the ultimate " hairdressers car" turned a perfectly good drive train 90 degrees off course (FWD). pinch a few Mini bits but keep to the North/South faith 
Where would Clarkson and Co be without "tail out action"? 
Where would Clarkson and Co be without "tail out action"? Graham
"The Morris Minor ECU is situated in the seat behind the steering wheel"
"The Morris Minor ECU is situated in the seat behind the steering wheel"