Page 1 of 1
Bolt sizes
Posted: Mon Dec 26, 2011 7:18 pm
by RussLCV
Can anyone advise the size of the rear nub nut are they 1" 1/16 or is that 48mm
Also the speedo housing nylon nut on the side of the gearbox near the filler
Thanks
H
Re: Bolt sizes
Posted: Mon Dec 26, 2011 10:00 pm
by les
Click on the spanner sizes heading at the top of Mechanical, You'll find the answers there, the speedo nut is the same as the steering wheel nut, I think!
Re: Bolt sizes
Posted: Mon Dec 26, 2011 10:18 pm
by RussLCV
Come on Les...............neither are listed and no its not its smaller!
H
Re: Bolt sizes
Posted: Mon Dec 26, 2011 10:34 pm
by les
Rear hub nut is listed it says 1- 1/8whit or 1- 7/8 af, the steering wheel nut size is also present at 3/4 whit, yes it may be smaller! I can check tomorrow but can't you just try a couple of spanners!!
Re: Bolt sizes
Posted: Tue Dec 27, 2011 1:31 pm
by les
Russ, the nylon speedo nut is 1 1/8 af. btw--- when you send the backplate would you include the 2 dowels from the marina block?