Morris Minor Owners Club

anyone know where you can buy the black window rubber inserts that fit the rear door windows??????

http://morrisminorspares.co.uk/shop/pro ... 40cc4ae9fd
and you will need the relevent fillet to go with it. Don't expect a good fit though as, unless I fitted mine incorrectly, it puckers up at the corners when you bend it round.

thanks for the info

Warm the rubber in a bucket of hot water for approx 5 mins before fitting, and once fitted all the way round, join should be at the bottom in the middle leave a bit excess stuck out and let it settle and cut of excess and push in so its neat. if you do it all in one go and cut it, ive seen them shrink and leave a small gap, which if thats the case i little bit of dum dum will be fine, ive never needed to use windscreen sealer when fitting these windows, they dont norm leak .... i would advise always repalcing the back door seals if i was you. East sussex minors sell good stuff and they always send you a bit extra in case you have any issues. Good luck and there not a bad job to do....

a bit of crossed wires here!!!! i have the window rubbers and glass fitted. just needed to know where to get the sealing inserts!!! which iam told are black? unlike the front sceen chrome look ones. anyway thanks for the advise and replies

http://www.woolies-trim.co.uk/c-122-screen-section.aspx

You will have to check for the size as these lacing strips come in several different sizes.