Page 1 of 2
i want seriously good bearings
Posted: Tue Nov 08, 2011 9:44 pm
by xpress
i want bearings so good it's like ice skating. the car just keeps on rolling. just good good bearings, any ideas?

Re: i want seriously good bearings
Posted: Tue Nov 08, 2011 10:06 pm
by bmcecosse
Re: i want seriously good bearings
Posted: Tue Nov 08, 2011 10:13 pm
by xpress
i want roller skates! i want skateboards strapped to the chassis of the morris miner!!!

Re: i want seriously good bearings
Posted: Tue Nov 08, 2011 10:16 pm
by beero
Just don't put grease in them, it only slows 'em down!!

Re: i want seriously good bearings
Posted: Tue Nov 08, 2011 10:41 pm
by xpress
how about butter? simon and garfunkel are on bbc1. sorry mods you can put this thread in off topic. it's gone a bit wrong!

Re: i want seriously good bearings
Posted: Wed Nov 09, 2011 12:24 am
by lambrettalad
try round ones

Re: i want seriously good bearings
Posted: Wed Nov 09, 2011 12:32 am
by cadetchris
someone been painting and left the window closed again?

Re: i want seriously good bearings
Posted: Wed Nov 09, 2011 12:20 pm
by silloyd
If you really want to emulate the bearing effect of an ice skate then
fluid dynamic bearings are the things you want. I'm sure you can get the parts from any of the normal suppliers or on eBay
But if you want to keep rolling ad infinitum then perpetual motion bearings are the answer. Check your local motor factors, usually on the shelf next to the bubbles for the spriti level, the sky hooks and the long weight (best just to ask for the latter really).

Re: i want seriously good bearings
Posted: Wed Nov 09, 2011 1:04 pm
by Bazzalucas
Going out on a limb here, but perhaps the OP was soliciting recommendations for the best possible wheel/axle bearings based on the experiences of the forum contributors? Brand name, supplier, etc? Crazy thought, but just maybe....
Re: i want seriously good bearings
Posted: Wed Nov 09, 2011 10:06 pm
by mike.perry
I used to pack the Campagnolo wheel bearings on my racing cycle with Vaseline. Before it got nicked

Re: i want seriously good bearings
Posted: Thu Nov 10, 2011 1:06 am
by MColes
mike.perry wrote:I used to pack the Campagnolo wheel bearings on my racing cycle with Vaseline. Before it got nicked

What you do with your wheel bearings in your own time is nobody elses business Mike

Re: i want seriously good bearings
Posted: Thu Nov 10, 2011 11:23 am
by Rasputin
mike.perry wrote:I used to pack the Campagnolo wheel bearings on my racing cycle with Vaseline. Before it got nicked

Who would want to steal vaseline?

Re: i want seriously good bearings
Posted: Thu Nov 10, 2011 1:26 pm
by Bazzalucas
Moderator, maybe it's time to move this thread into "non-mior related" issues...
Re: i want seriously good bearings
Posted: Thu Nov 10, 2011 8:36 pm
by charlie_morris_minor
Bazzalucas wrote:Moderator, maybe it's time to move this thread into "non-mior related" issues...
theft of vaseline is probably a minor theft
Re: i want seriously good bearings
Posted: Thu Nov 10, 2011 9:14 pm
by les
Will you want some seriously good oil to go with these bearings?
Re: i want seriously good bearings
Posted: Thu Nov 10, 2011 9:16 pm
by lambrettalad
Maybe the thief was a young greaser !!!
Re: i want seriously good bearings
Posted: Fri Nov 11, 2011 3:26 pm
by katy
Put larger wheels on the back of the car than the ones on the front. That way it's going downhill all the time and will roll much easier.
Re: i want seriously good bearings
Posted: Sat Nov 12, 2011 9:15 pm
by les
The update should be interesting

Re: i want seriously good bearings
Posted: Sat Nov 12, 2011 10:37 pm
by Dean
xpress wrote:i want bearings so good it's like ice skating. the car just keeps on rolling. just good good bearings, any ideas?

Did you lose your bearings? You could have mine, but they have gone missing too...
Re: i want seriously good bearings
Posted: Sun Nov 13, 2011 12:33 am
by xpress
you know how it is, you can get very good bearings these days. abec series. maybe ceramic ones?
