Page 1 of 1
Van replacement rubber
Posted: Wed Oct 19, 2011 3:47 pm
by Rod Garvie
hi
I want to replace the rubber seal between the van body and the cab can you advise if this is easy or what
Re: Van replacement rubber
Posted: Mon Sep 02, 2013 4:12 pm
by garfield
not easy and requires a lot of patience,
not to be undertaken lightly,
original seal was in three pieces,
that was bad enough,
but now you can on purchase in one piece,
if determined to proceed may I suggest you go back to the drawing board!
and do in 3 pieces as per original,
a little bit of grease or light glue to hold in place while pulling cab and cargo box back together
MogB.