Morris Minor Owners Club

Hi,could anyonehelp me?I dont know what these clips look like or how they fit,My morry has had new rubbers fitted but they do not seem right,can move glass and there is a gap between rubber and glass on outside about 5mm does not seem to be hard up against metal frame.thanks

Welcome to the Forum. The original fittings are not 'touch glass' like modern cars - but I believe some suppliers do touch glass rubbers. You can do your own search! Here's a front door to get you started http://www.moss-europe.co.uk/Shop/ViewP ... exID=17131

Old Jay, do you mean the door windows or the windows immediately behind the doors on a two-door saloon?

I think we're talking about the rear windows on a 2 Dr. I have 2 2 drs and neither have these clips - must have been removed and never replaced when the window rubbers were replaced.

Just removed and replaced these windows during my rebuild. There was one clip on the passenger side and none
on the drivers side, they don't seem to make much difference......just waiting for the windows to fall out now

Fingolfin wrote:Old Jay, do you mean the door windows or the windows immediately behind the doors on a two-door saloon?

Hi,yes it is on 2door there is no clips that I can see and you can move the seal and glass,also 6mm gap between glass and seal outside,dont know how or what keeps it in.Help would be appreciated,Thanks old jay