Page 1 of 1
How do I fit a rear seat belt?
Posted: Sun Oct 09, 2011 6:24 pm
by scuzzmonkey
I've just brought a '71 two door Moggy and need to fit a rear seat belt to hold a child seat. As a newbie to Minors could anyone advise me how to fit one and what fittings I would need? Do I need to weld the belt bracket into place or does it just screw in?
Many thanks.
Re: How do I fit a rear seat belt?
Posted: Sun Oct 09, 2011 8:51 pm
by mike.perry
This subject has been dealt with several times. Search through the topics and there are full descriptions and drawings
Re: How do I fit a rear seat belt?
Posted: Sun Oct 09, 2011 9:03 pm
by linearaudio
Quote from a previous poster:"OK, I think I`ve found some answers! I decided to Google the same question and bingo; I get taken to the Morris Minor Owners club forum. So why such a problem to search the forum for the answers that are here anyway? I tried many combinations/ advanced search but did`nt get anywhere. Next time I`ll just Google, it`s so much quicker!!!!!!!!"
Maybe that is your best route! Certainly putting "rear seat belts" in the search box on here doesn't help much!
Oh and welcome to the friendly forum
Re: How do I fit a rear seat belt?
Posted: Mon Oct 10, 2011 10:23 am
by bmcecosse
The mountings certainly don't 'weld on' - and since the rear seat folds down, make sure you attach the straps in such a way that the seat won't affect them if it collapses forward in an accident. It may be worth securing the seat back so it WILL NOT fold forwards.
Re: How do I fit a rear seat belt?
Posted: Thu Oct 13, 2011 9:47 pm
by scuzzmonkey
Many thanks for all your replies