Morris Minor Owners Club

does anybody know where you can get the pipe that fits on a oil pressure gauge? i have all the fittings just need some pipe. is there any other pipe i could use

Standard pipe for Smiths Instruments, try the internet

looked on internet!!! all are sold with the fittings just want some pipe and then use what i have here

Hi

Plastic pipes with fittings are less than a tenner is it worth the aggro?

Try these http://www.speedograph-richfield.com/ht ... lpipelines

taupe

Are you going to risk the fittings that you put on the ends of the pipes coming off under pressure? Messy!

The local hardware store sells plastic pipe of the orrect dimension (1/8 inch OD, I think), by the foot. Their plumbing dept also carries the nuts and ferrules. All for around $5.00 USD. Give that a try.

East Sussex Minors do them for £5.95 inc fittings

all sorted got some pipe from a welding supplier its done the trick. have been using the car for two weeks with no probs

And - is the oil pressure good?

bmcecosse wrote:And - is the oil pressure good?

yes it shows 60 at start up and 40 when warmed up on the smiths gauge

40 when running at anything greater than 40 mph is a bit on the low side....... If however that's an idling pressure - then it's grand!

yes that when idling. over 40mph its 60+

No worries then - that's perfect.