Morris Minor Owners Club

1962 car..... indicator switch with warning light on end

The warning light has been working intermittently, so I dug the old lilliput bulb out with difficulty & replaced it.
Now it's not working at all...I'm wondering if there is a poor connection somewhere. So before I attempt to remove the cowling to have a look can anyone help with a sequence or any tips.

The manual has no instructions at all.

Thanks

Chris

Test new bulb
Check new bulb is screwed in tight
Check indicators are working
Check wires on connector block
Run a test light from Terminal P to earth

Thanks, Mike
much appreciated.

Having tested it first... I carefully screwed the new bulb in tight with a pair of needle nosed pliers & it now works fine

Chris