Morris Minor Owners Club

Hi,

What is the concencus on fitting replacement front or rear sill repair panels and the front spring hangers. looking at charles ware site it looks like these are fitted on top of the floor rather than cut out and butt welded. I assume once completed and drenched in waxoyl or similar the overlap should not be a problem?

any views? thanks

Chris

cut out and butt weld

Is the quality way, putting one sheet of metal on top of another lets water in much easier than Waxoyl with predictable results

hi i cut my floor away for front spring hangers leaving about an inch all round so i welded from under an also inside were possible using the new part with the bigger plate[frame][/frame][frame][/frame]