Page 1 of 1
Choke cable for my 1952 mm
Posted: Fri Sep 16, 2011 6:19 pm
by mikec
It may be a long shot I don't know, but I need a choke cable and pinch bolt (for the inner cable) for my 1952 sidevalve MM. Can any one help please
Re: Choke cable for my 1952 mm
Posted: Fri Sep 16, 2011 10:06 pm
by mike.perry
I may have a used one, I will have a look over the weekend.
Can I have the details of your car for the register please?
Re: Choke cable for my 1952 mm
Posted: Sat Sep 17, 2011 5:21 pm
by mikec
mike.perry wrote:I may have a used one, I will have a look over the weekend.
Can I have the details of your car for the register please?
Thanks for having a look mike,i was wondering if i would have trouble with the pinch bolt? Also you already have my car details it's the black two door thats been in hibernation since 76
Re: Choke cable for my 1952 mm
Posted: Sun Sep 18, 2011 9:36 pm
by mike.perry
The only choke control I can find is for a 1098 M1000. You could probably make a pinch bolt.
Find the largest diameter fully threaded bolt that will fit through the end of the choke lever and drill a hole through it large enough to take the choke inner cable. Fit the bolt through the hole in the choke lever, fit the choke cable through the bolt then a washer and tighten up with a nut